Focusrite RedNet X2P

$47.98 $61.41

RedNet X2P is a compact, portable and robust 2x2 Dante™ audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable – simply use a power over Ethernet switch or PoE injector. A local input mixer allows `more me` monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite`s acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.FeaturesStereo 2x2 audio interface for Dante Audio-over-IP networksTwo Red Evolution mic preamps for mic, line or instrument level inputsPower-over-Ethernet supplied: IEEE 802.3af compliantUp to 24-bit, 96kHz sampling ratesRobust steel and aluminium chassisLocal input mix to allow ‘more-me’ style monitoring for easy foldback controlPowerful headphone output even with high-impedance headphonesLocal control lockout of mic pre settings, output settings or bothUp to 24dBu line output levelsIndependent level control of headphone and line outputsMute switch for line outputMic stand mountKensington security slotIntegrated network switch allowing daisy-chaining of network devicesBrainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.AES67 compliantSpecificationMicrophone/ Line InputsGain Range - 0dB to 68dB in 1dB stepsType - Electronically Balanced, Zin = 6.2kOMax. Input Level - > 24dBu, min gain</li> <li>Frequency Response - 20Hz - 35kHz ±0.1dB</li> <li>THD N - -103dB (0.0007%) @ -1dBFS (@ 24dB Gain)</li> <li>EIN - -130dBu `A`-Weighted (typical)</li> <li>Signal-To-Noise Ratio - -120dB `A`-Weighted (typical), min gain</li> <li>Common-Mode Rejection Ratio - 50/60Hz CMRR: -80dB</li> <li>Phantom Power - 48V, independently switchable per channel.</li> <li>HPF - High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel</li> <li>Air Mode - 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kO</li> </ul> <hr> Instrument Inputs <hr> <ul> <li>Instrument Inputs Gain Range - 0dB to 68dB in 1dB steps</li> <li>Instrument Inputs Type - Electronically Balanced, Zin = 2MO</li> <li> Instrument Inputs Max. Input Level - > 15dBu, min gain</li> <li>Instrument Inputs Frequency Response - 20Hz - 35kHz ±0.1dB</li> <li>Instrument Inputs THD N - -100dB (0.001%) @ -1dBFS (@ 16dB Gain)</li> <li>Instrument Inputs Signal-To-Noise Ratio - -118dB `A`-Weighted (typical), min gain</li> <li>Instrument Inputs HPF - High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel</li> </ul> <hr> Line Level Outputs <hr> <ul> <li>Line Level Outputs 0 DBFS Reference Levels - 18 or 24dBu (switchable)</li> <li>Line Level Outputs Frequency Response - 20Hz - 35kHz ±0.1dB</li> <li>Line Level Outputs THD N - -104dB (0.0006%) @ -1dBFS</li> <li>Line Level Outputs Dynamic Range - -120dB `A`-Weighted (typical), 20Hz - 20kHz</li> </ul> <hr> Headphone Output <hr> <ul> <li>Headphone Output 0 DBFS Reference Levels - 19dBm</li> <li>Headphone Output Frequency Response - 20Hz - 20kHz ±0.2dB</li> <li> Headphone Output THD N - -103dB (0.0007%) @ -1dBFS</li> <li>Headphone Output Dynamic Range - 117dB `A`-weighted (typical), 20Hz - 20kHz</li> <li> Headphone Output Impedance - 5O</li> <li>Headphone Impedance - 32O - 600O</li> </ul> <hr> Microphone/Line Crosstalk <ul> <li>Mic/Line Input To Input - < -72dB; 20Hz - 20kHz (driven channel at -20dBFS) <li> Mic/Line Input To Output - < -126dB; 20Hz - 20kHz (driven channel at -20dBFS) 24dBu, min gainFrequency Response - 20Hz - 35kHz ±0.1dBTHD N - -103dB (0.0007%) @ -1dBFS (@ 24dB Gain)EIN - -130dBu `A`-Weighted (typical)Signal-To-Noise Ratio - -120dB `A`-Weighted (typical), min gainCommon-Mode Rejection Ratio - 50/60Hz CMRR: -80dBPhantom Power - 48V, independently switchable per channel.HPF - High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channelAir Mode - 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kOInstrument InputsInstrument Inputs Gain Range - 0dB to 68dB in 1dB stepsInstrument Inputs Type - Electronically Balanced, Zin = 2MO Instrument Inputs Max. Input Level - > 15dBu, min gain</li> <li>Instrument Inputs Frequency Response - 20Hz - 35kHz ±0.1dB</li> <li>Instrument Inputs THD N - -100dB (0.001%) @ -1dBFS (@ 16dB Gain)</li> <li>Instrument Inputs Signal-To-Noise Ratio - -118dB `A`-Weighted (typical), min gain</li> <li>Instrument Inputs HPF - High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel</li> </ul> <hr> Line Level Outputs <hr> <ul> <li>Line Level Outputs 0 DBFS Reference Levels - 18 or 24dBu (switchable)</li> <li>Line Level Outputs Frequency Response - 20Hz - 35kHz ±0.1dB</li> <li>Line Level Outputs THD N - -104dB (0.0006%) @ -1dBFS</li> <li>Line Level Outputs Dynamic Range - -120dB `A`-Weighted (typical), 20Hz - 20kHz</li> </ul> <hr> Headphone Output <hr> <ul> <li>Headphone Output 0 DBFS Reference Levels - 19dBm</li> <li>Headphone Output Frequency Response - 20Hz - 20kHz ±0.2dB</li> <li> Headphone Output THD N - -103dB (0.0007%) @ -1dBFS</li> <li>Headphone Output Dynamic Range - 117dB `A`-weighted (typical), 20Hz - 20kHz</li> <li> Headphone Output Impedance - 5O</li> <li>Headphone Impedance - 32O - 600O</li> </ul> <hr> Microphone/Line Crosstalk <ul> <li>Mic/Line Input To Input - < -72dB; 20Hz - 20kHz (driven channel at -20dBFS) 15dBu, min gainInstrument Inputs Frequency Response - 20Hz - 35kHz ±0.1dBInstrument Inputs THD N - -100dB (0.001%) @ -1dBFS (@ 16dB Gain)Instrument Inputs Signal-To-Noise Ratio - -118dB `A`-Weighted (typical), min gainInstrument Inputs HPF - High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channelLine Level OutputsLine Level Outputs 0 DBFS Reference Levels - 18 or 24dBu (switchable)Line Level Outputs Frequency Response - 20Hz - 35kHz ±0.1dBLine Level Outputs THD N - -104dB (0.0006%) @ -1dBFSLine Level Outputs Dynamic Range - -120dB `A`-Weighted (typical), 20Hz - 20kHzHeadphone OutputHeadphone Output 0 DBFS Reference Levels - 19dBmHeadphone Output Frequency Response - 20Hz - 20kHz ±0.2dB Headphone Output THD N - -103dB (0.0007%) @ -1dBFSHeadphone Output Dynamic Range - 117dB `A`-weighted (typical), 20Hz - 20kHz Headphone Output Impedance - 5OHeadphone Impedance - 32O - 600OMicrophone/Line CrosstalkMic/Line Input To Input - Mic/Line Input To Output - Output To Mic/Line Input - Output CrosstalkOutput To Output - Digital Performance Supported Sample Rates - 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / 0.1% / 4.167%) at 24 bit Clock Sources - Internal or from Dante Network MasterFront Panel ConnectivityOutputs Headphone Outputs - 1 x 1/4" stereo jackRear Panel ConnectivityInputs Mic/Line/Inst Inputs - 2 x Locking Combi XLR Outputs Line Outputs - 2 x Male XLR More Less

Headphone Systems