RedNet AM2 is a compact, Power-over-Ethernet (PoE) -supplied stereo analogue output device for any Dante audio-over-IP network. Featuring a powerful headphone amp, capable of driving both high and low impedance headphones, RedNet AM2 is the ideal signal monitoring device to add extra functionality to your audio network.A pair of rear-panel XLR outputs offers line level signals of up to 24dBu with top panel level control and mute switch, while the front panel 1/4" headphone output is capable of driving high signal levels perfect for monitoring in high-SPL environments. The bottom of the sturdy aluminium and steel chassis features a threaded mic stand boss allowing RedNet AM2 to be placed in any convenient location whether on a desk or at a performer`s fingertips on a stand. Finally, the IEEE standard PoE input allows a single Ethernet cable to provide power, remote control, clocking and audio data to RedNet AM2.FeaturesStereo line output and headphone for Dante audio-over-IP networksPower-over-Ethernet supplied: IEEE 802.3af compliantUp to 24-bit, 96kHz sampling ratesRobust steel and aluminium chassisPowerful headphone output even with high-impedance headphonesUp to 24dBu line output levelsIndependent level control of headphone and line outputsMute switch for line outputMic stand mountKensington security slotIntegrated network switch allowing daisy-chaining of network devicesAES67 compliantBrainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.SpecificationLine Level Outputs0 DBFS Reference Output Levels - 18 or 24dBu (switchable)Frequency Response Output - 20Hz - 20kHz ±0.05dBTHD N Output - -100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS inputDynamic Range - 120dB A-weighted (typical), 20Hz - 20kHzCrosstalkOutput To Output - -100dB unweighted, 20Hz - 20kHz; -20dBFS inputHeadphone Output0 DBFS Reference Levels Headphones - 19dBmHeadphone Frequency Response - 20Hz - 20kHz ±0.05dBHeadphone THD N - -100dB (0.001) unweighted, 20Hz - 20kHz; -1dBFS inputHeadphone Dynamic Range - 118dB A-weighted (typical), 20Hz - 20kHzOutput Impedance - 50Headphone Impedance - 32O - 600ODigital PerformanceSupported Sample Rates - 44.1 / 48 / 88.2 / 96 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bitClock Sources - Internal or from Dante Network MasterMinimum Latency - 1msFront Panel ConnectivityHeadphone Outputs - 1 x 1/4" stereo jackLine Outputs - 2 x Male XLRPSU (PoE And DC) - 1 x PoE (Port 1) Input and 1 x DC 12V Barrel Input ConnectorNetwork - Green LED: Indicates device is network master or network slave, shows valid network lockTop Panel IndicatorsPower - LED illuminates Green when PoE is connected and Red when DC power is connectedSignal - Signal indicator LED for both network input channelsMute - Red LED Control Functions - 2 x Pots More Less
